Pneumatic Hammers
Pneumatic Hammer Antivibration
- 0 Review
3/4" and 1" Pneumatic hammer for working all kind of stones.
Anti vibration rubber that enclose the hammer to eliminate part of the vibrations of the work.
Connection shank 12,5 mm
Pneumatic Hammer Standard
- 0 Review
Pneumatic hammer for working all kind of stones.
Connection shank 12,5 mm
Available in 3/4" and 1" please choose the desired size:
Pneumatic Hammer Cuturi
- 0 Review
Pneumatic Hammer Cuturi
10 different models available
Please choose the model and see the characteristics:
Carbide Tools + Cuturi E
- 0 Review
Carbide Carving set with different measures of chisels, used for all kind of stones. Pneumatic Hammer Cuturi E included. Tool connexion 7mm
1 Pneumatic Hammer Cuturi E (7mm connection)
1 Carbide Pointed chisel
1 Carbide Toothed Chisel
1 Carbide Chisel 4mm
1 Carbide Chisel 6mm
1 Carbide Chisel 8mm
1 Casing
Pneumatic Pen Mod.P Cuturi
- 1 Reviews
Cuturi Pneumatic Hammer Pen used mainly for engraving, embossing, and restoring on a multitude of surfaces that need to be treated with some delicacy.
Includes 3 carbide tools, the air hose and the wrench.
_0x210.jpg)
Ring Retainer 1" Pneumatic hammer
- 0 Review
Pneumatic hammer 1" with retainer for tooling with ring.
To work all kind of stones.
Connection tool 12,5 mm.
Pneumatic Hammer TROW & HOLDEN
- 0 Review
3/4 "pneumatic hammer to work all kinds of stones.
Manufactured to connect, if desired, a retaining ring so that the tools do not fall while working. Ring and tools not included.
There are two types of ring, one is for chisels and the other is for bushings.
12.5 mm tool connection
GS 43/6 Pneumatic hammer
- 0 Review
Our air hammers for stonemasons and sculptors are ideal for carving and precise stone work. Connection 12,7 x 50
Pneumatic Hammer 41
- 0 Review
Pneumatic Hammer 41
Includes 1 bushing with 4 carbide teeth
Tool Connection Diameter = 10.2 mm
Speed 2,600 s.p.m.
Weight 1.60kg / 3.52lbs
Acoustic power ISO 15744 104 dBA / 116 power
Vibration ISO 8662/1 9.0 m/s²
Average Air Consumption 3.0 CFM / 1.4 L/S
Pneumatic Hammer Conical
- 0 Review
Pneumatic Hammer BMR 19
Tool Connection Diameter = 13 mm CONICAL
Speed 3000 s.p.m.
Weight 2kg / 4,4lbs
Working Pressure: 3-6 bar
Piston 19mm
Stroke 55mm
Average Air Consumption 300 L/Min
Carbide Tools kit + Pneumatic hammer
- 0 Review
Carbide stone carving set with different measures of chisels, used for all kind of stones. Pneumatic Hammer Cuturi also included. Tool connexion 12,5 mm
1 Pneumatic Hammer Cuturi U
1 Carbide Chisel 20mm
1 Carbide Chisel 16mm
1 Carbide Chisel 10mm
1 Carbide Chisel 4mm
1 Carbide Bullnose 6mm
1 Carbide Bullnose 12mm
1 Carbide Pointed Chisel
1 Carbide Claw Chisel 14mm 3 teeth
1 Carbide Claw Chisel 12mm 4 teeth
1 Casing
Pneumatic Hammer for splitting rocks
- 0 Review
Pneumatic Hammer for splitting rocks
Includes a 25x450mm Wedge
Weight: 9.8kg
Length: 395mm
Piston diameter: 36mm
Number of impacts (p/minute): 1,710bpm
Air consumption (p/minute): 1.05m3
Air inlet: ¾
Tool connection: Round 25mm
PNEUMATIC HAMMERS
Pneumatic hammers, are tools that work through pneumatic force, using compressed air. In addition to stone, a wide variety of materials such as wood, concret and precast can be worked with pneumatic tools.
SAFETY AND MAINTENANCE OF PNEUMATIC TOOLS
Although pneumatic tools are safe, it is important to consider certain precautions for their proper use and to keep them in good condition.
At Rock&Tools, our main priority is the safety of our customers, so we have created a safety kit that includes reusable earplugs, disposable plugs, a mask to protect against stone dust, safety glasses, and half-finger anti-vibration gloves.
Once we are properly protected, it is advisable to lubricate the tool before using it. To do this, we will place the tool with the air inlet facing up and add a few drops of the specific lubricant for tools. Then, we will connect the hose so that the oil is distributed internally. At Rock&Tools, we have a specially designed oil for pneumatic hammers.
Before starting to use the tool, we must make sure that it is properly connected to the compressor, ensuring that the thread is completely tightened. After using it, it is important to disconnect the hose from the compressor. Finally, to prevent rust from appearing, it is essential to properly clean the tools after use and store them in a dry place.
OUR TYPES OF PNEUMATIC HAMMERS
We have a wide variety of pneumatic hammers, below are some of our products:
ANTI-VIBRATION PNEUMATIC HAMMER
3/4" and 1" pneumatic hammer for working all types of stones.
PNEUMATIC HAMMER STANDARD
Pneumatic hammer for working all kind of stones.
PNEUMATIC HAMMER CUTURI
Available in 10 different models.
PNEUMATIC HAMMER TROW & HOLDEN
Trow&Holden 3/4" pneumatic hammer for working all types of stones. Designed to connect, if desired, a retaining ring so that tools do not fall while working. Ring and tools not included.
FREQUENTLY ASKED QUESTIONS WHEN BUYING PNEUMATIC HAMMERS
Whether you are a professional or just starting out and learning, it is normal to have the following doubts:
- How long will it take to arrive because you need it for an urgent project?
- How to choose the right tool?
- How should you take care of the tool to maintain it properly?
That's why you always have access to our advisory service. This email address is being protected from spambots. You need JavaScript enabled to view it.
PERSONALIZED ADVICE FROM ROCK & TOOLS
Although us stone professionals love to immerse ourselves in our projects and distance ourselves from the outside world, we don't bite!
Every person is unique, and that's why we offer personalized advice tailored to your needs. We are happy to help you with whatever you need, and there is no better way to do it than in person:
Call us by phone: +34 96 424 10 23
Contact us by email: This email address is being protected from spambots. You need JavaScript enabled to view it.
We have a team of professionals who can assist you in Spanish, English, and French.
We will answer all your questions, even those that challenge us to see if we are specialists in the field. Furthermore, we focus on advising professionals and beginners so that they get the most out of our tools and achieve the results they want adapted to their level.
