Stone splitting Wedge & Shim
Product SKU :- 0 Review
Splitter / Separator Wedges Shims
Splitting wedges, also called expanders or expanders, are used to split larger stones into two parts.
These separating wedges are made up of 3 pieces, 2 side wings (which must be inserted into the hole that we have made with the drill) and a central piece, which is the piece that is struck with the hammer.
Choose the size you need from the drop-down below
Product Category: Rock Splitting Wedges & Shims, Hand tools, Dry Stone Tools
Splitter / Separator Wedges Shims
Splitting wedges, also called expanders or expanders, are used to split larger stones into two parts.
These separating wedges are made up of 3 pieces, 2 side wings (which must be inserted into the hole that we have made with the drill) and a central piece, which is the piece that is struck with the hammer.
It is recommended to use several wedges to split a stone, they must be distributed along the stone, normally the wedges are placed with a distance of one hand from each other, although technically a wedge can be placed every length of their distance, that is, that if the wedge is 20cm long, 20cm will be the maximum distance between each wedge.
The wedges can start at a maximum of three times their length (here the hardness of the stone and different factors influence). For example, the 20cm wedge will split a maximum 60cm high stone.
Wedges available
Ref. 57-00346 Hole 14 mm Length 95 mm
Ref. 57-00347 Hole 18 mm Length 150 mm
Ref. 57-00505 Hole 20 mm Length 150 mm
Ref. 57-00348 Hole 22 mm Length 150 mm
Ref. 57-00506 Hole 29 mm Length 200 mm
Ref. 57-00349 Hole 29 mm Length 300 mm
Ref. 57-00350 Hole 32 mm Length 300 mm
Ref. 57-00507 Hole 34 mm Length 300 mm
Ref. 57-00508 Hole 34 mm Length 400 mm
Ref. 57-00509 Hole 34 mm Length 500 mm
Ref. 57-00351 Hole 36 mm Length 300 mm
Ref. 57-00510 Hole 36 mm Length 400 mm
Ref. 57-00511 Hole 36 mm Length 500 mm
- There are yet no reviews for this product.
