Splitting wedges, also called expanders or expanders, are used to split larger stones into two parts.

These separating wedges are made up of 3 pieces, 2 side wings (which must be inserted into the hole that we have made with the drill) and a central piece, which is the piece that is struck with the hammer.

It is recommended to use several wedges to split a stone, they must be distributed along the stone, normally the wedges are placed with a distance of one hand from each other, although technically a wedge can be placed every length of their distance, that is, that if the wedge is 20cm long, 20cm will be the maximum distance between each wedge.

The wedges can start at a maximum of three times their length (here the hardness of the stone and different factors influence). For example, the 20cm wedge will split a maximum 60cm high stone.

Wedges available
Ref. 56-00561 Hole 22 mm Length 115 mm
Ref. 56-00562 Hole 25 mm Length 300 mm
Ref. 56-00563 Hole 30 mm Length 300 mm
Ref. 56-00564 Hole 30 mm Length 400 mm
Ref. 56-00566 Hole 30 mm Length 600 mm
Ref. 56-00567 Hole 30 mm Length 800 mm
Ref. 56-00568 Hole 35 mm Length 300 mm
Ref. 56-00569 Hole 35 mm Length 400 mm
Ref. 56-00570 Hole 35 mm Length 500 mm
Ref. 56-00571 Hole 35 mm Length 600mm
Ref. 56-00572 Hole 35 mm Length 800 mm
Ref. 56-00573 Hole 40 mm Length 300 mm
Ref. 56-00574 Hole 40 mm Length 400 mm
Ref. 56-00575 Hole 40 mm Length 500 mm
Ref. 56-00576 Hole 40 mm Length 600 mm
Ref. 56-00577 Hole 40 mm Length 800 mm