Stone splitting Wedge & Shim
Product SKU :- 1 Reviews
Splitter / Separator Wedges Shims
Splitting wedges, also called expanders or expanders, are used to split larger stones into two parts.
These separating wedges are made up of 3 pieces, 2 side wings (which must be inserted into the hole that we have made with the drill) and a central piece, which is the piece that is struck with the hammer.
Choose the size you need from the drop-down below
Product Category: Wedges & Shims, Hand tools, Dry Stone Tools
Splitter / Separator Wedges Shims
Splitting wedges, also called expanders or expanders, are used to split larger stones into two parts.
These separating wedges are made up of 3 pieces, 2 side wings (which must be inserted into the hole that we have made with the drill) and a central piece, which is the piece that is struck with the hammer.
It is recommended to use several wedges to split a stone, they must be distributed along the stone, normally the wedges are placed with a distance of one hand from each other, although technically a wedge can be placed every length of their distance, that is, that if the wedge is 20cm long, 20cm will be the maximum distance between each wedge.
The wedges can start at a maximum of three times their length (here the hardness of the stone and different factors influence). For example, the 20cm wedge will split a maximum 60cm high stone.
Wedges available
Ref. 51-19001 Hole 18 mm Length 135 mm
Ref. 51-19002 Hole 24 mm Length 160 mm
Ref. 51-19003 Hole 26 mm Length 220 mm
Ref. 51-19004 Hole 30 mm Length 265 mm
Ref. 51-19005 Hole 32 mm Length 330 mm
Ref. 51-19006 Hole 34 mm Length 375 mm
3 jours de livraison de l'Espagne à la Suisse, ouahou, quelle rapidité! Tout y était