Search Stone Tools

Low Vibrations Pneumatic Pencil

Product SKU : 51-10359
  • 0 Review

Special pneumatic pencil, high quality, made in Italy, very low vibrations! Connection 6 mm.

Product Category: Pneumatic Pens, Pneumatic Tools

Pneumatic pencils are machines composed mainly of a cylinder and a piston made of special steel and tempered with high precision, thus guaranteeing less wear and durability.

This pneumatic pencil was created for engraving and small chiselling on marble, stones and granites. The pencils are equipped with a 3 mm point chisel made of carbide.

This particular model is specially designed to provide very low vibrations.


Weight: 250 gr

Working pressure: 3 bars

Air consumption: 80 l / min.

Beats per minute: 6300

Do not push on the handle with a force greater than 10 Newton to avoid that the springs are greatly compressed inside the sleeve and thus reduce the effectiveness of the vibration damping system.

To remove the hammer: unscrew the ring taking care with the expulsion of the internal springs.

Do not wet the machine with water or solvents to avoid damage.

Make the connection to the circuit of the compressed air with a G1 / 8 connection, better if it is of the fast type and with possibility of rotation of 360º. Never remove any connections already installed on the machine.

Never exceed 3 bars because it would damage the machine.

You can also work with lower pressures according to the needs of the job.

It is mandatory to use purified compressed and dryed air. It is advisable to constantly lubricate the pencils with a few drops of special oil for pneumatic hammers to be placed in the air connection.



Always use original spare parts that guarantee greater reliability and safety of the machine.

  • There are yet no reviews for this product.