Pneumatic Hammers

Mini Oilmist lubricator

  • 0 Review

78,65 €
TAX inc

Useful oilmist lubricator for mobile work with e.g. light and medium-heavy chiselling hammers. If the distance between an oiler and a pneumatic machine is over ca.5m (16ft) the oil will condense inside the hose. This model can easily be connected in short distance to the tool. Complete with nipple connector and quick-release coupling.
Size without connectors. D.39x72mm
Max input pressure: 6 bar

6 Mt Hose for Pneumatic Hammers

  • 0 Review

77,00 €
TAX inc

6 Mts of hose for pneumatic hammers

Chisel Ring for Trow Hammer

  • 0 Review

19,97 €
TAX inc

Retaining Rubber ring for chisels for Trow Pneumatic Hammer

Bushing Ring for Trow Hammer

  • 0 Review

27,23 €
TAX inc

Retaining Rubber ring for bushing chisels for Trow Pneumatic Hammer

Air Tool Safety kit

  • 0 Review

210,00 €
TAX inc

Air Tool Safety Set. Includes:
-1 pair of reusable ear plugs.
-3 pairs of disposable earplugs
-Advantage respirator, which offers protection from stone dust
-Safety glasses
-Valeo half-finger anti-vibration gloves

Oil for pneumatic hammers 200ml

  • 0 Review

18,15 €
TAX inc

Special oil for pneumatic hammers. 200ml

Filter Regulator Lubricator

  • 0 Review

157,00 €
TAX inc

Lubricator Regulator Filter, recommended to use any pneumatic equipment, such as pneumatic hammers, pneumatic grinders, etc. The filter regulates the air flow in addition to constantly lubricating the pneumatic equipment.
Specific oil should be used for pneumatic tools.

Pack Carving kit 3 + Stone + Book

  • 0 Review

399 € - 399 € TAX inc

Set of PNEUMATIC tools to begin the learning of stone sculpture.
The pack consists of
-Pneumatic Set with 1 Pneumatic hammer 3/4" + 5 Steel tools
-Block of 9Kg stone, you can choose Limestone or Sandstone
-Book of sculpture, you can choose Spanish or English

MATERIAL
LIBRO / BOOK / LIVRE
Choose a variant

Carbide Tools kit for Pneumatic hammer

  • 0 Review

215,00 €
TAX inc

Pneumatic Carbide stone carving set with 7 carbide chisels of different measures, used for all kind of materials. Connexion tools 12,5mm available for pneumatic hammers with 12,5mm-12,7mm round connection.

Steel Tools kit + Pneumatic hammer

  • 0 Review

358,99 €
TAX inc

Steel stone carving set with different measures of chisels, used for all kind of stones. Pneumatic Hammer ¾” also included. Tool connexion 12,5 mm

Bush hammering Pneumatic Platform

  • 0 Review

678,00 €
TAX inc

Pneumatic hammer platform with hammer 1″. Connection 15,5 mm

Ergonomic pneumatic hammer

  • 0 Review

625 € - 625 € TAX inc

Our air hammers for stonemasons and sculptors are ideal for carving and precise stone work. Connection 12,7 x 50

Consumption
Weight
Choose a variant

PNEUMATIC HAMMERS

Pneumatic hammers, are tools that work through pneumatic force, using compressed air. In addition to stone, a wide variety of materials such as wood, concret and precast can be worked with pneumatic tools.

SAFETY AND MAINTENANCE OF PNEUMATIC TOOLS

Although pneumatic tools are safe, it is important to consider certain precautions for their proper use and to keep them in good condition.

At Rock&Tools, our main priority is the safety of our customers, so we have created a safety kit that includes reusable earplugs, disposable plugs, a mask to protect against stone dust, safety glasses, and half-finger anti-vibration gloves.

Once we are properly protected, it is advisable to lubricate the tool before using it. To do this, we will place the tool with the air inlet facing up and add a few drops of the specific lubricant for tools. Then, we will connect the hose so that the oil is distributed internally. At Rock&Tools, we have a specially designed oil for pneumatic hammers.

Before starting to use the tool, we must make sure that it is properly connected to the compressor, ensuring that the thread is completely tightened. After using it, it is important to disconnect the hose from the compressor. Finally, to prevent rust from appearing, it is essential to properly clean the tools after use and store them in a dry place.

 

OUR TYPES OF PNEUMATIC HAMMERS

We have a wide variety of pneumatic hammers, below are some of our products:

ANTI-VIBRATION PNEUMATIC HAMMER

3/4" and 1" pneumatic hammer for working all types of stones.

PNEUMATIC HAMMER STANDARD

Pneumatic hammer for working all kind of stones.

PNEUMATIC HAMMER CUTURI

Available in 10 different models.

PNEUMATIC HAMMER TROW & HOLDEN

Trow&Holden 3/4" pneumatic hammer for working all types of stones. Designed to connect, if desired, a retaining ring so that tools do not fall while working. Ring and tools not included.

FREQUENTLY ASKED QUESTIONS WHEN BUYING PNEUMATIC HAMMERS

Whether you are a professional or just starting out and learning, it is normal to have the following doubts:

  • How long will it take to arrive because you need it for an urgent project? 
  • How to choose the right tool?
  • How should you take care of the tool to maintain it properly?

That's why you always have access to our advisory service. This email address is being protected from spambots. You need JavaScript enabled to view it. 

PERSONALIZED ADVICE FROM ROCK & TOOLS

Although us stone professionals love to immerse ourselves in our projects and distance ourselves from the outside world, we don't bite!

Every person is unique, and that's why we offer personalized advice tailored to your needs. We are happy to help you with whatever you need, and there is no better way to do it than in person:

Call us by phone: +34 96 424 10 23

Contact us by email: This email address is being protected from spambots. You need JavaScript enabled to view it.

We have a team of professionals who can assist you in Spanish, English, and French.

We will answer all your questions, even those that challenge us to see if we are specialists in the field. Furthermore, we focus on advising professionals and beginners so that they get the most out of our tools and achieve the results they want adapted to their level. 

Results 1 - 12 of 25