Extra Long Carbide Carving Chisel

Carbide Chisel extra Long
250 mm of total length.

Mallet Head for soft stone.
Hammer Head for hard stone.

Available in the following sizes:
Ref. 57-00104 Carbide Cutting width 4 mm / Hammer Head / Shaft thickness 8mm
Ref. 57-00105 Carbide Cutting width 6 mm / Hammer Head / Shaft thickness 8mm
Ref. 57-00106 Carbide Cutting width 8 mm / Hammer Head / Shaft thickness 8mm
Ref. 57-00107 Carbide Cutting width 10 mm / Hammer Head / Shaft thickness 10mm
Ref. 57-00108 Carbide Cutting width 12 mm / Hammer Head / Shaft thickness 10mm
Ref. 57-00109 Carbide Cutting width 14 mm / Hammer Head / Shaft thickness 10mm
Ref. 57-00110 Carbide Cutting width 16 mm / Hammer Head / Shaft thickness 10mm
Ref. 57-00111 Carbide Cutting width 18 mm / Hammer Head / Shaft thickness 12mm
Ref. 57-00112 Carbide Cutting width 20 mm / Hammer Head / Shaft thickness 14mm

Ref. 57-00113 Carbide Cutting width 4 mm / Mallet Head / Shaft thickness 8mm
Ref. 57-00114 Carbide Cutting width 6 mm / Mallet Head / Shaft thickness 8mm
Ref. 57-00115 Carbide Cutting width 8 mm / Mallet Head / Shaft thickness 8mm
Ref. 57-00116 Carbide Cutting width 10 mm / Mallet Head / Shaft thickness 10mm
Ref. 57-00117 Carbide Cutting width 12 mm / Mallet Head / Shaft thickness 10mm
Ref. 57-00118 Carbide Cutting width 14 mm / Mallet Head / Shaft thickness 10mm
Ref. 57-00119 Carbide Cutting width 16 mm / Mallet Head / Shaft thickness 10mm
Ref. 57-00120 Carbide Cutting width 18 mm / Mallet Head / Shaft thickness 12mm
Ref. 57-00121 Carbide Cutting width 20 mm / Mallet Head / Shaft thickness 14mm